Duke's Independence Day Extravaganza
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Duke's Independence Day Extravaganza
Food! Fireworks!! and Wheeling!!! Friday night steak and tater dinner!!!! and of course, lies about a campfire every evening till the adult beverages kick in are all in store for those attending this years festivities. There's a lot of interest in empty seats, so you can be the first to get somebody to have to change their britches in the woods! (Spyder Gulch would be a good place to try).
So who's attending?
Duke
So who's attending?
Duke
Last edited by Duke Winch on Sat Jun 18, 2011 11:00 am, edited 1 time in total.
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Duke's Independence Day Extravaganza
We are planning on it!
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
Re: Duke's Independence Day Extravaganza
Do you allow Chevy s-10's with loud exhaust? ( I do own a jeep, but it got stuck in my driveway; so I've heard thats what happens to jeeps). I would be a MAYBE. Might have to haul 2 jeeps down to Olive Springs, Tenn. (thats the town where Coal Creak offroad park is) that weekend.
-
- MIJC Treasurer
- Posts: 993
- Joined: Wed Jan 26, 2005 12:14 pm
- MIJC Member: Yes
- Full Name: Fraser Yarker
- Member page: http://mijc.org/members/u-z/yarker-fraser/
- Location: Pekin, IL
- Contact:
Re: Duke's Independence Day Extravaganza
Count me in.
1998 TJ (Wrangler) - usually driveable
19xx J-truck
Parts
19xx J-truck
Parts
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Duke's Independence Day Extravaganza
Carrie and I are in... should be good for Friday night to Sunday.
Re: Duke's Independence Day Extravaganza
As of now, please count me in. I have the Cj sitting in the weeds with the front diff scattered in the garage. I think I have a plan..found a steel fence post that might work for a tie rod. Think I can bend it over the leaf springs...what the worse can happen??
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Duke's Independence Day Extravaganza
Always the jokester, aren't ya Max.
-
- MIJC Treasurer
- Posts: 993
- Joined: Wed Jan 26, 2005 12:14 pm
- MIJC Member: Yes
- Full Name: Fraser Yarker
- Member page: http://mijc.org/members/u-z/yarker-fraser/
- Location: Pekin, IL
- Contact:
Re: Duke's Independence Day Extravaganza
"I can't steer!!"wizard wrote:what the worse can happen??
1998 TJ (Wrangler) - usually driveable
19xx J-truck
Parts
19xx J-truck
Parts
- Shell & Ken
- Posts: 40
- Joined: Mon Oct 19, 2009 4:38 pm
- MIJC Member: Yes
- Full Name: Ken and Michelle Carlisle
- Member page: http://mijc.org/members/a-d/carlisle-ken-michelle/
- Location: South Pekin, IL
- Contact:
Re: Duke's Independence Day Extravaganza
Ken and I are planning to come. Will prolly bring the 94 stock YJ tho, as we don't have the 92 going yet...
Also, Ken and I both completed the 3.28 mile 10 obstacle course Warrior Dash this past Sunday!!!! Hoohrah!!!!! It was hard, verrrrrrrrrrrrrryyyy muddy, but great fun! Other news: We have decided to put the detroit locker and super 35 back under the TJ.
I have some questions for all you jeep mechanics out there:
1) We need the ring & pinions (456) for my TJ, is there a better brand we should look for or does it matter? Do we also need a rebuild kit?
2) Can we get it locally around here or do we need to order it online, if so, where?
Any info would be greatly appreciated so that I can get the parts needed asap (especially if they need to be ordered online).
Thanks,
~Shell[
Also, Ken and I both completed the 3.28 mile 10 obstacle course Warrior Dash this past Sunday!!!! Hoohrah!!!!! It was hard, verrrrrrrrrrrrrryyyy muddy, but great fun! Other news: We have decided to put the detroit locker and super 35 back under the TJ.
I have some questions for all you jeep mechanics out there:
1) We need the ring & pinions (456) for my TJ, is there a better brand we should look for or does it matter? Do we also need a rebuild kit?
2) Can we get it locally around here or do we need to order it online, if so, where?
Any info would be greatly appreciated so that I can get the parts needed asap (especially if they need to be ordered online).
Thanks,
~Shell[
2000 TJ Wrangler, 94 YJ Wrangler, 92 "Jeepzilla" YJ Wrangler
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Re: Duke's Independence Day Extravaganza
I purchase my gears from Randy's Ring and Pinion. Very knowledgeable, since gears and axles is about all they do, and quick shipping. Randy's doesn't make anything and just re-badges the stuff they sell as Yukon. Ask if they have gears from Spicer as I feel they are the best.
Duke
Duke
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
- Matt Brown
- Posts: 617
- Joined: Thu Jan 27, 2005 7:33 am
- MIJC Member: Yes
- Full Name: Matt Brown
- Member page: http://mijc.org/members/a-d/matt-brown/
- Location: Carlinville, IL
Re: Duke's Independence Day Extravaganza
I plan to be there on Saturday.
Proudly sponsored by Champion, Fram and Pennzoil for the 2019 wheeling season.
Video star since 2006
Video star since 2006
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Re: Duke's Independence Day Extravaganza
You can tent camp in the Dun-Did-Er-Campground (there's power in the campground), or bring a camper, or you can sleep in my camper (Three full size beds), or stake out a place in the house. Just bring your own bedding.vt98xj wrote:Camping okay?
I'll have 3 spots in my XJ, if anyone wants to keep the mud off of them
We can use your three seats, there are three guests that I know of that are coming, possibly more.
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
-
- Posts: 99
- Joined: Sat Mar 26, 2005 7:01 pm
- MIJC Member: No
- Full Name: Bob Lamb
- Location: Pekin,Il.
- Contact:
Re: Duke's Independence Day Extravaganza
i will be there be heading down from pekin friday morning
1995 yj, 2000 f250, 2003 v-rod
- Race47
- Posts: 74
- Joined: Tue Oct 07, 2008 5:00 pm
- MIJC Member: No
- Full Name: Jeff Hopwood
- Location: Canton, IL
Re: Duke's Independence Day Extravaganza
I plan on it. It depends on work. Whether I make it Fri night or Sat morn. Michelle has to work this weekend. So I have one empty seat. What do I need to bring for meals?
Jeff
2001 ,TJ 35-12/50 KM 2's Dana 30 ARB yukon shafts and CTM joints, Currie anti rock, 8.8 Detroit Locker, 4.88
2001 ,TJ 35-12/50 KM 2's Dana 30 ARB yukon shafts and CTM joints, Currie anti rock, 8.8 Detroit Locker, 4.88
-
- MIJC Events Coordinator
- Posts: 545
- Joined: Tue Jun 13, 2006 8:02 pm
- MIJC Member: Yes
- Full Name: Al and Kat Wallace
- Member page: http://www.mijc.org/members/u-z/wallace-al/
- Location: Pekin
Re: Duke's Independence Day Extravaganza
Good news bad news, good news I worked on the transfer case shifter rods today and ther's no major damage, the jeep is good to go. Bad news, we have grandkids birthday parties sat. & sun next weekend & will not be attending the festivities. Have fun wish we could be there
83 CJ- d44 F&R, Detroit locker in R, ARB in F, 4.88 gears, AMC 304 ,T18 tranny, appr.6" of lift,Warm 9.5xpwinch,Allen built custom bumpers & spare tire holder, 37x12.5 IROK radials
97 TJ-PURTY JEEP
05 Unlimited Rubicon
97 TJ-PURTY JEEP
05 Unlimited Rubicon
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Duke's Independence Day Extravaganza
Jim and Michelle are planning on arriving sometime on Friday and leaving Saturday night.
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Re: Duke's Independence Day Extravaganza
Just for foods sake, please be a bit more specific as to when you will be arriving. I would hate to come up short on taters Friday night.
By the way, the forecast is looking pretty good for the remainder of the week through the weekend!
Duke
By the way, the forecast is looking pretty good for the remainder of the week through the weekend!
Duke
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Re: Duke's Independence Day Extravaganza
You will be missed, but spoiling the grandkids is more important.alkat wrote:Good news bad news, good news I worked on the transfer case shifter rods today and ther's no major damage, the jeep is good to go. Bad news, we have grandkids birthday parties sat. & sun next weekend & will not be attending the festivities. Have fun wish we could be there
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Duke's Independence Day Extravaganza
To be more specific, Carrie and I will be leaving after work and arriving around 8:30 or 9 Friday night. A waiting meal would be gah-lovely. We're planning on camping. We'll be departing sometime Sunday.
Who has the MIJC paper plate/plastic cutlery collection? It would be great if that could make it down to Duke's with someone.
Who has the MIJC paper plate/plastic cutlery collection? It would be great if that could make it down to Duke's with someone.
Re: Duke's Independence Day Extravaganza
..pencil me in for late Friday...if I have to I will throw parts on the trailer and truck in hopes I can get something running for the week end...cann't find blue tape though..
I have a new forward- backward lever to put in, have to cut a hole in the hole and such...
I have a new forward- backward lever to put in, have to cut a hole in the hole and such...
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Duke's Independence Day Extravaganza
What kind did you get?wizard wrote:I have a new forward- backward lever to put in, have to cut a hole in the hole and such...
-
- MIJC Treasurer
- Posts: 993
- Joined: Wed Jan 26, 2005 12:14 pm
- MIJC Member: Yes
- Full Name: Fraser Yarker
- Member page: http://mijc.org/members/u-z/yarker-fraser/
- Location: Pekin, IL
- Contact:
Re: Duke's Independence Day Extravaganza
I hope to arrive in time to eat Friday evening, and leave sometime Monday. I'll be in my camper and would like to plug in at the campground, if possible.
1998 TJ (Wrangler) - usually driveable
19xx J-truck
Parts
19xx J-truck
Parts
-
- Posts: 1072
- Joined: Wed May 24, 2006 7:31 pm
- MIJC Member: Yes
- Full Name: Bill Gangloff
- Member page: http://mijc.org/members/e-j/bill-vicki-gangloff/
- Location: peoria,il.
Re: Duke's Independence Day Extravaganza
Its a 4x4, gate hinge, bailing wire , shift lever. The 4x4 doubles as a flip me back on my wheels tool.wdln wrote:What kind did you get?wizard wrote:I have a new forward- backward lever to put in, have to cut a hole in the hole and such...
Bill
83- cj7, 80-cj5, 77 cj5 for parts
Re: Duke's Independence Day Extravaganza
..had to have been the slowest roll-over in history....