Flat Nasty Jadwin MO March 30th
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
We are still going but at this time I will not be bringing the Jeep.
Still have not figured out what to do about the back tires.
Still have not figured out what to do about the back tires.
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
- Duke Winch
- Posts: 1088
- Joined: Wed Jan 26, 2005 6:55 pm
- MIJC Member: Yes
- Full Name: Steve Vohs
- Member page: http://www.mijc.org/members/u-z/vohs-steve/
- Location: Ramsey, IL
Re: Flat Nasty Jadwin MO March 30th
What's wrong with the back tires? Oh ... i have an empty seat if you don't mind round head lights.TSEJEEPERS wrote:We are still going but at this time I will not be bringing the Jeep.
Still have not figured out what to do about the back tires.
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter
- Jon Martin
- MIJC Events Coordinator
- Posts: 765
- Joined: Wed Jan 26, 2005 4:42 pm
- MIJC Member: Yes
- Full Name: Jon Martin
- Member page: http://mijc.org/members/k-o/martin-jon/
- Location: Pekin, Illinois
Re: Flat Nasty Jadwin MO March 30th
Just tighten up the lug nuts with a bigger socket wrench than you used at the Badlands...... seriously, it was like a 8 inch handle....
MIJC member since 1998!!!
President of Turtle Enterprises and DBA
1951 CJ3A
President of Turtle Enterprises and DBA
1951 CJ3A
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
I do not think that will do it.Jon Martin wrote:Just tighten up the lug nuts with a bigger socket wrench than you used at the Badlands...... seriously, it was like a 8 inch handle....
The surface area on the back of the rims is not flat.
My spacer/adapter is not large enough to span the gaps, so there is not enough of the spacer sitting flat against the rim.
I will tell you about it at Flat Nasty.
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Flat Nasty Jadwin MO March 30th
Did I miss something? Was there some kind of spectacular wheel departure from Tom's Jeep at the Badlands that was not in the damage report post? Do tell!
-
- Posts: 99
- Joined: Sat Mar 26, 2005 7:01 pm
- MIJC Member: No
- Full Name: Bob Lamb
- Location: Pekin,Il.
- Contact:
Re: Flat Nasty Jadwin MO March 30th
tom i have a set of billet 4 1/4 to 5 1/5 adapters from when i was running the 8.8 if they would work better than yours?
1995 yj, 2000 f250, 2003 v-rod
Re: Flat Nasty Jadwin MO March 30th
Is it better to have a hard top or a soft top at Flat Nasty?
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
I would go with the soft top.bikercec wrote:Is it better to have a hard top or a soft top at Flat Nasty?
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
No just a wobbling wheel.wdln wrote:Did I miss something? Was there some kind of spectacular wheel departure from Tom's Jeep at the Badlands that was not in the damage report post? Do tell!
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
-
- MIJC Events Coordinator
- Posts: 545
- Joined: Tue Jun 13, 2006 8:02 pm
- MIJC Member: Yes
- Full Name: Al and Kat Wallace
- Member page: http://www.mijc.org/members/u-z/wallace-al/
- Location: Pekin
Re: Flat Nasty Jadwin MO March 30th
It would just be a matter of preference. Performance wise it makes no difference at all. Sometimes you might want to lean out and see where your wheel is at, which way can you see it better?
83 CJ- d44 F&R, Detroit locker in R, ARB in F, 4.88 gears, AMC 304 ,T18 tranny, appr.6" of lift,Warm 9.5xpwinch,Allen built custom bumpers & spare tire holder, 37x12.5 IROK radials
97 TJ-PURTY JEEP
05 Unlimited Rubicon
97 TJ-PURTY JEEP
05 Unlimited Rubicon
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
Thanks for the offer Bob, but they need to have a outer diam. of at least 7.20 inches.bob lamb wrote:tom i have a set of billet 4 1/4 to 5 1/5 adapters from when i was running the 8.8 if they would work better than yours?
Mine and probably every other one is around 6 1/2 inches.
I have been in contact with a company that can make me the correct one.
I will order it tomarrow and when I get them I will update my post on weld on beadlocks.
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
-
- MIJC Events Coordinator
- Posts: 545
- Joined: Tue Jun 13, 2006 8:02 pm
- MIJC Member: Yes
- Full Name: Al and Kat Wallace
- Member page: http://www.mijc.org/members/u-z/wallace-al/
- Location: Pekin
Re: Flat Nasty Jadwin MO March 30th
So Tom, are you still going jeepless?
83 CJ- d44 F&R, Detroit locker in R, ARB in F, 4.88 gears, AMC 304 ,T18 tranny, appr.6" of lift,Warm 9.5xpwinch,Allen built custom bumpers & spare tire holder, 37x12.5 IROK radials
97 TJ-PURTY JEEP
05 Unlimited Rubicon
97 TJ-PURTY JEEP
05 Unlimited Rubicon
-
- Posts: 2609
- Joined: Thu Jan 27, 2005 10:14 am
- MIJC Member: Yes
- Full Name: Tom and Sally Evans
- Member page: http://mijc.org/members/e-j/tom-sally-evans/
Re: Flat Nasty Jadwin MO March 30th
Taking the Commander does that count?
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier
-
- MIJC Events Coordinator
- Posts: 545
- Joined: Tue Jun 13, 2006 8:02 pm
- MIJC Member: Yes
- Full Name: Al and Kat Wallace
- Member page: http://www.mijc.org/members/u-z/wallace-al/
- Location: Pekin
Re: Flat Nasty Jadwin MO March 30th
Yea that counts.
83 CJ- d44 F&R, Detroit locker in R, ARB in F, 4.88 gears, AMC 304 ,T18 tranny, appr.6" of lift,Warm 9.5xpwinch,Allen built custom bumpers & spare tire holder, 37x12.5 IROK radials
97 TJ-PURTY JEEP
05 Unlimited Rubicon
97 TJ-PURTY JEEP
05 Unlimited Rubicon
-
- Posts: 1072
- Joined: Wed May 24, 2006 7:31 pm
- MIJC Member: Yes
- Full Name: Bill Gangloff
- Member page: http://mijc.org/members/e-j/bill-vicki-gangloff/
- Location: peoria,il.
Re: Flat Nasty Jadwin MO March 30th
Strange, I haven't had any problems with my spacers.
83- cj7, 80-cj5, 77 cj5 for parts
- wdln
- Web Admin
- Posts: 1577
- Joined: Wed Jan 26, 2005 10:23 am
- MIJC Member: Yes
- Full Name: Dave Lennie
- Member page: http://mijc.org/members/k-o/lennie-dave-carrie/
- Location: Bartonville, IL
- Contact:
Re: Flat Nasty Jadwin MO March 30th
Looking forward to seeing video of Tom wheeling the commander while Sally looks on in horror...
- tchpet
- Posts: 165
- Joined: Thu Aug 16, 2012 5:04 pm
- MIJC Member: Yes
- Full Name: Shannon Duling
- Member page: http://mijc.org/members/a-d/duling-shannon/
Re: Flat Nasty Jadwin MO March 30th
I know it is last minute, but Dave and I will be coming down on Friday and plan on leaving on Sunday. We made our own sleeping arrangements. Hopefully, we will be able to join everyone for dinner Friday night, but with such late notice, we may be on our own. We will be riding in Dave's black Jeep. Mine is still waiting on parts....over 3 weeks so far!!!!
See everyone there,
Shannon
See everyone there,
Shannon