Dukes Independence Day run July 7,8

Check here for updates on MIJC Events.
Post Reply
TSEJEEPERS
Posts: 2537
Joined: Thu Jan 27, 2005 10:14 am
MIJC Member: Yes
Full Name: Tom and Sally Evans
Member page: http://mijc.org/members/e-j/tom-sally-evans/

Dukes Independence Day run July 7,8

Post by TSEJEEPERS » Sun Jun 24, 2018 3:16 pm

Duke is this happening?
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier

User avatar
Duke Winch
Posts: 1049
Joined: Wed Jan 26, 2005 6:55 pm
MIJC Member: Yes
Full Name: Steve Vohs
Member page: http://www.mijc.org/members/u-z/vohs-steve/
Location: Ramsey, IL

Re: Dukes Independence Day run July 7,8

Post by Duke Winch » Tue Jun 26, 2018 5:28 am

Yes! This event is a go!
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter

Fraser
Posts: 931
Joined: Wed Jan 26, 2005 12:14 pm
MIJC Member: Yes
Full Name: Fraser Yarker
Member page: http://mijc.org/members/u-z/yarker-fraser/
Location: Pekin, IL
Contact:

Re: Dukes Independence Day run July 7,8

Post by Fraser » Tue Jun 26, 2018 7:35 pm

Mmmm, smoker time...
1998 TJ (Wrangler) - usually driveable
19xx J-truck
Parts

TSEJEEPERS
Posts: 2537
Joined: Thu Jan 27, 2005 10:14 am
MIJC Member: Yes
Full Name: Tom and Sally Evans
Member page: http://mijc.org/members/e-j/tom-sally-evans/

Re: Dukes Independence Day run July 7,8

Post by TSEJEEPERS » Tue Jun 26, 2018 8:20 pm

Yep I am planning on bringing the smoker, so I will not be wheeling.
Post up if you are planning on going!
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier

Fraser
Posts: 931
Joined: Wed Jan 26, 2005 12:14 pm
MIJC Member: Yes
Full Name: Fraser Yarker
Member page: http://mijc.org/members/u-z/yarker-fraser/
Location: Pekin, IL
Contact:

Re: Dukes Independence Day run July 7,8

Post by Fraser » Tue Jun 26, 2018 9:09 pm

Kim and I will be there. Jeep TBD.
1998 TJ (Wrangler) - usually driveable
19xx J-truck
Parts

User avatar
Matt Brown
Posts: 583
Joined: Thu Jan 27, 2005 7:33 am
MIJC Member: Yes
Full Name: Matt Brown
Member page: http://mijc.org/members/a-d/matt-brown/
Location: Carlinville, IL

Re: Dukes Independence Day run July 7,8

Post by Matt Brown » Wed Jun 27, 2018 9:55 am

I am planning on coming over. I guess depending on everyone else if I bring the Jeep or not.
Proudly sponsored by Champion, Fram and Pennzoil for the 2017 wheeling season.

Video star since 2006

LarryWilson
MIJC President
MIJC President
Posts: 80
Joined: Thu Jul 29, 2010 3:59 pm
MIJC Member: Yes
Full Name: Larry Wilson
Member page: http://mijc.org/members/u-z/wilson-larry-jennifer/
Location: East Peoria, IL

Re: Dukes Independence Day run July 7,8

Post by LarryWilson » Fri Jun 29, 2018 5:20 pm

One adult and one child will be attending.

Larry

User avatar
jpet
Posts: 11
Joined: Wed May 10, 2017 2:48 pm
MIJC Member: No
Full Name: Jeff Petrowich
Location: Ramsey IL

Re: Dukes Independence Day run July 7,8

Post by jpet » Wed Jul 04, 2018 8:36 pm

I'll be there Saturday.
CJ2A 10910
CJ2A 29110 "Gen'l Willys"
MB 204827 "BAM BAM"

My Videos

LarryWilson
MIJC President
MIJC President
Posts: 80
Joined: Thu Jul 29, 2010 3:59 pm
MIJC Member: Yes
Full Name: Larry Wilson
Member page: http://mijc.org/members/u-z/wilson-larry-jennifer/
Location: East Peoria, IL

Re: Dukes Independence Day run July 7,8

Post by LarryWilson » Thu Jul 05, 2018 6:34 pm

Unfortunately, the parts that were suppose to be here on Tuesday, still have not shipped. So my transmission is still in pieces. :( So, I will not be coming down for the fun.

Sorry,
Larry

vlucdog
Posts: 1067
Joined: Wed May 24, 2006 7:31 pm
MIJC Member: Yes
Full Name: Bill Gangloff
Member page: http://mijc.org/members/e-j/bill-vicki-gangloff/
Location: peoria,il.

Re: Dukes Independence Day run July 7,8

Post by vlucdog » Thu Jul 05, 2018 9:11 pm

I'm coming Saturday with a Jeep, leaving Sunday
83- cj7, 80-cj5, 77 cj5 for parts

vlucdog
Posts: 1067
Joined: Wed May 24, 2006 7:31 pm
MIJC Member: Yes
Full Name: Bill Gangloff
Member page: http://mijc.org/members/e-j/bill-vicki-gangloff/
Location: peoria,il.

Re: Dukes Independence Day run July 7,8

Post by vlucdog » Fri Jul 06, 2018 8:40 pm

I also am unable to make this weekend, something came up and I need to be in Peoria.
83- cj7, 80-cj5, 77 cj5 for parts

TSEJEEPERS
Posts: 2537
Joined: Thu Jan 27, 2005 10:14 am
MIJC Member: Yes
Full Name: Tom and Sally Evans
Member page: http://mijc.org/members/e-j/tom-sally-evans/

Re: Dukes Independence Day run July 7,8

Post by TSEJEEPERS » Sun Jul 08, 2018 12:40 pm

Thank you so much Steve.
We had a blast!
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier

User avatar
Duke Winch
Posts: 1049
Joined: Wed Jan 26, 2005 6:55 pm
MIJC Member: Yes
Full Name: Steve Vohs
Member page: http://www.mijc.org/members/u-z/vohs-steve/
Location: Ramsey, IL

Re: Dukes Independence Day run July 7,8

Post by Duke Winch » Sun Jul 08, 2018 8:41 pm

Your Welcome! Everyone had a great time. The trap shooting competition after you left was pretty awesome. As group are batting average was around .950.
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter

LarryWilson
MIJC President
MIJC President
Posts: 80
Joined: Thu Jul 29, 2010 3:59 pm
MIJC Member: Yes
Full Name: Larry Wilson
Member page: http://mijc.org/members/u-z/wilson-larry-jennifer/
Location: East Peoria, IL

Re: Dukes Independence Day run July 7,8

Post by LarryWilson » Wed Jul 11, 2018 7:02 am

Sounds like everyone had a lot of fun!

User avatar
Duke Winch
Posts: 1049
Joined: Wed Jan 26, 2005 6:55 pm
MIJC Member: Yes
Full Name: Steve Vohs
Member page: http://www.mijc.org/members/u-z/vohs-steve/
Location: Ramsey, IL

Re: Dukes Independence Day run July 7,8

Post by Duke Winch » Wed Jul 11, 2018 2:45 pm

BTW Tom. The smoked chicken is awesome!
2000 TJ, D60s, 38" TSLs, 4:1 Transfer Case, 4 link rear, 3 link front, 9" stretch, hydro steering
Duke's Off Road...Where if you don't have an engineering problem, We'll design one for you!
Duke's Off Road Ranch - Closed for winter

TSEJEEPERS
Posts: 2537
Joined: Thu Jan 27, 2005 10:14 am
MIJC Member: Yes
Full Name: Tom and Sally Evans
Member page: http://mijc.org/members/e-j/tom-sally-evans/

Re: Dukes Independence Day run July 7,8

Post by TSEJEEPERS » Thu Jul 12, 2018 8:10 am

Enjoy!
It's hip to be square!!! []lllll[] NVRDUN9 93 YJ SOA XJ spring stretch, High pinion 9" rear Detroit locker, Dana 44 front ARB locker, 4.56 gears, Sanden OBA, Warn M8274 winch, 36" Iroks, Turtle enterprises swing out tire carrier

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests